Table of Contents 

02 - Carbide and Alloy Tips

03 - Carbide and Alloy Tips

04 - Carbide and Alloy Tips

05 - Carbide and Alloy Tips

06 - Carbide and Alloy Tips

07 - Carbide and Alloy Tips

08 - Accu-Ground Maintenance Equipment

08 - Indicators - Block and Side Style

09 - Flux & Silver Solder

10 - Diamond Wheels

11 - Diamond Wheels

12 - Diamond Wheels

13 - Diamond Wheels

14 - Diamond Wheels

15 - Diamond Wheels

16 - Diamond Wheels

17 - Diamond Wheels

18 - Grinding Wheels

19 - Grinding Wheels

20 - Grinding Wheels

21 - Grinding Wheels

22 - Knife Grinding

23 - Knife Grinding

24 - Dresser Bricks

25 - Hammers

25 - Safe Edge Tooth Protector

25 - Bits and Shanks

25 - Grinding Coolants

26 - Guide Blocks, Pads and Spacers

26 - Electric and Hand Filers

26 - Swages

26 - Gauges

26 - Welding Rods

27 - Saw Wrenches & Pins for Chisel Tooth Saws

27 - Files

27 - Feedroll Bars

28 - ITCO Teeth (Available in Steel, Carbide & Inlaid)

29 - Metcalf Dressers

29 - Desmond Dressers & Cutters

29 - Babbitt Tanks and Accessories

Hammers

Safe Edge Tooth Protector

Safe Edge Tooth Protector

Tough, reusable plastic material to protect people and band saw teeth.

Full 350 ft. coils.

Bits & Shanks

• Sharper and longer lasting
• Refined double heat treating process
• Available in all styles and patterns
• Use with chisel-tooth, inserted tooth cut-off and carbide inserted tooth cut-off saws.
• Replaceable bits & shanks protect the plate from wear resulting in longer life.
• Repairs are inexpensive as damaged bits can be removed while the saw is on the arbor.
• Bits can be filed with Pacific/Hoe files for easy maintenance.

All Bits are available:

Stellite(tm) is a registered trademark of the Stoody Deloro Corp.

Coolants

Sta-Kool is a fully synthetic grinding fluid specially formulated for the high-speed grinding of carbide tip saw blades, steel and all types of knife alloys.

• Resists foaming and misting for improved visibility, health and safety.
  

• Cleaning and flushing properties extend wheel life.
  
• Improves work environment - does not dissolve cobalt from cemented tungsten carbide.
  
• Low-foam formula leaves the tank clear and clean.
  
• Superior corrosion resistance.
  
• Light, opaque, green fluid which, when diluted, turns clear for superior operator visibility.
  
• Controls rancidity - Additives inhibit the growth of odor-producing bacteria.
  
• Save - contains no nitrites, phenols, cresols, PCB's, harsh solvents or alkalines.

Available in 275 gallon totes, 55 gallon drums and 5 gallon pails.

Iceberg Sta-Kool 20/20 Low Foam Grinding Fluid for Steel

• Specially formulated for steel.
  

• Effectively prevents corrosion at extended dilutions (50-80:1 with water), even on polished cast iron.

Iceberg Sta-Kool 30/30 Low Foam Grinding Fluid for Carbide

• Specially formulated for carbide grinding.
  

• Very economical - can be diluted 40:1.
  

Cobalt Coolants

Your customers will be asking you about "Cobalt" coolants, this includes carbide and Stellite(tm) grinders.

We have been working in the plant for the last year on a reformulated 30/30 coolant. The results are phenomenal and we have also now developed a very simple standard test for cobalt.

The goal is to have a coolant for cobalt that does not allow the cobalt to dissolve or leach into the coolant. The new 30/30 does this - the cobalt settles out and drops to the bottom of the sump.

• The machines are easy to wash down
  

• No sticky or colored mess to work on
  
• Initial Charge Ratio - 20:1
  
• Recharge Ratio - 35:1

A "Cobalt Test Strip" (like litmus paper) developed with a local lab, is now available. It is dipped into the sump to get an instant reading.

All of our grinders have been converted to 30/30 and a one gallon container is shipped with every Jacobsen grinder.

Available in 1gal or 5 gal containers.
 

Cobalt Test Strips

Available in Packages of 100.
 

Hydro Proportioner

For accurate mixing